So after searching I found a double D 3/4 inch universal that would allow me to fit to the end of the steer column I have. Here it is in all its expensive glory.
The next task to fit it to the column.
Before i started the grinding filing I packed out the cabs front subframe to allow ne to mount and test clearances for the steering
After lots of careful measuring, filing and grinding the universal is on the column.
Mocked up steering, only problem is that it wont clear the rear most header. So I will have to bring the bottom universal forward. But that leads to more external machining work been done... and more $$. So going to noodle my options
